DIY swivel seats for nv200 Cab

19 May

capital seating universal swivel baseKDR seat rails for for and aft adjustment

My 2013 SE dci version has no fore and aft adjustment on the passenger cab seat. We would need a pair of seat rails to convert to swivel seats. The picture above shows just one example of “universal” seat rail from KDR Seating available on ebay. We would also need a pair of “universal” seat base swivels such as that shown from Capital Seating on ebay.
Rails of this type lift the seat by between 15mm for slimline to 25mm for standard rails. The swivel base will add between 35mm to 55mm to this raising the passenger seat by up to 80mm. By carefully selecting your seat rails and base swivel you can lift your seats sufficiently to clear the centre console etc when revolving the seats to face away from the screen. You will probably have to shuffle the seat back and forwards on the rails as you turn the seat to miss the steering wheel and so on.
There may be some drilling to do and possibly some cutting and welding to make a neat job of the swivels.It may take 2 or 3 (or more!) trial fitments and dismantling to get everything to work correctly. You will save money this way but will not get TUV approvals, for example.
Seat rails can have locking on each rail which keeps the seat more secure but means that the distance between the rails is pre-set to cope with the operating levers supplied (different widths are available to suit different seat sizes and designs) Alternatively, one rail is locking and the other is just a slave rail without locking. This means that the distance between rails can vary a lot more but the seat may be arguably less secure.
If you try this for yourself, check all dimensions prior to ordering any parts and if in doubt consult a qualified engineer.
A very quick guide shows that the driver’s seat needs lifting about 80mm which is a 55mm swivel plus a 25mm spacer and the passenger seat requires about 65mm raise which could be done using a 55mm swivel and a slimline pair of 15mm rails.Has anyone got more accurate and proven dimensions please? NB this is only a guide.


4 Responses to “DIY swivel seats for nv200 Cab”

  1. Thomas Hueber October 8, 2015 at 6:22 pm # provides approved seat swivels for the NV200

    • Isaac TAYLOR October 23, 2015 at 7:05 pm #

      How can I get a set of these in nz??

      • Dinkum October 23, 2015 at 9:15 pm #

        try based Germany or DIY versions available via UK ebay. Comment again on the latest available post on here if you still need help.

  2. Dinkum October 9, 2015 at 8:38 am #

    Hi Thomas, I am pleased to publish your link. I have mentioned zooom elsewhere on the Blog. I believe that your products have TUV approval. Regards from England!

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: